Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 23.06.2025 08:46

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

There are two important concepts here.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

I post the exact comment here.

Column | Nervous about using the bathroom at work? A gastroenterologist shares advice. - The Washington Post

But… the neutral is now “floating” because of the 1 ohm resistance.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Blue Origin performs 12th crewed New Shepard suborbital flight - SpaceNews

One

What does a fuse do?

This device then solves the entire problem.

What is your daily motivation and does it work?

A circuit breaker is similar, but is resettable.

The bolt then partially travels down the line to your home.

so, what happens?

Necessitatibus ipsa sequi animi dolores molestiae.

Barnstars:

He then describes Rainy Season and Lightning.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Horoscope for Thursday, June 12, 2025 - Chicago Sun-Times

This is 'the assistant's answer'

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

It also is a device that limits the change in current flow.

Does the color purple really exist? - Live Science

These devices are installed between the “hot” and “neutral” and protective ground.

At least they know the answer if they wanted it.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Helen Hunt on why she's rejecting Hollywood beauty standards - USA Today

At one ohm, the resistor has a maximum of 1 watt power.

He then asserts :

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Recently, I cleared my JP Morgan coding round. Next, I received mail for a video interview. What kind of questions are asked in this round? How do I prepare myself?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

but this device (an Inductor) … impedes the rapid changes in the current.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Est sit omnis doloribus placeat rem necessitatibus.

Upvotes:

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

eight

Is Beehiiv better than Substack?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

What is lightning?

Why are men ridiculously delusional in the women they want/approach? I'm not a troll. This is a real question. Why does a fat, pot bellied, unkempt, balding, stupid (ergo poor) man, tell a woman above his league that she isn't hot enough for him?

A fuse is a non-resetable over current circuit protector.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Oakmont caddies look to fill roles during U.S. Open, on and off the bag - TribLIVE.com

The MOV will conduct when the voltage exceeds 50% of line voltage.

a photo is worth a thousand words.

This one hit behind the barn.

There are three different concepts here that are getting confused.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

[image of Common-mode choke]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

(Dc diagram shown, AC is similar).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

what exactly is a ‘surge’ protector?

These are simplified answers to the original question, and does not change anything I wrote above.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

the problem then depends on "how fast does the fuse operate?".

But it can get overloaded, and no longer works.

Now when you have a certain ac resistance, then a current flows in a loop.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

It seems Mohan does not understand the difference between a comment and an Answer.

For this case there are devices called Metal oxide varistors (MOV).

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

First Sentence:

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Edit 2024–10.

An AC voltage/ current source, and an ac inductive load.

In schematic diagrams this is the symbol for a fuse:

Here is a simplified AC power diagram.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

nine

So, the voltage could go up to 500 volts, and the fuse will not open up.

The other is “what does a “fuse” do?”

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

2024–10–10[John johnson John Johnson ]

but I think this circuit , shows a few more pieces.

[old diagram got deleted by accident]

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Because the load is inductive, the current lags the voltage.(by a bit).

He then describes the function of a fuse.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

2024–10–16 [ OO OLAOYE OYEBODE ]

This is where the MOV conducts again, and dissipated the energy.

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

One is “what exactly is in a ‘surge protector’ ? ”

The third is lightning and “how it gets conducted into a home.”